My nvim.lua File Dotfile
This is the config I have setup for Neovim:
Code
-- Test plugin
vim.keymap.set('n', '<M-S-f>', function()
require('grimoire_invocations.calls').export_to_file()
end, { desc = 'Export from the grimoire' })
-- Leader must be mapped before rt: requiring other plugins
vim.g.mapleader = ','
vim.g.maplocalleader = ','
-- Setup so the Neovim layer on the moonlander
-- j and k jump paragraphs up and down in the
-- same way regular layer j and k move lines
vim.keymap.set('n', '(', "}", {})
vim.keymap.set('o', '(', "}", {})
vim.keymap.set('v', '(', "}", {})
vim.keymap.set('n', '=', "{", {})
vim.keymap.set('o', '=', "{", {})
vim.keymap.set('v', '=', "{", {})
-- vim.keymap.set({ 'n', 'v' }, '<Space>', '<Nop>', { silent = true })
-- Save a file with s and ENTER-s
vim.keymap.set('n', 's', ':wa<cr>', {})
-- Swap most recent files in the main window
vim.keymap.set('n', '<M-S-a>', '<C-^>', {})
vim.keymap.set('i', '<M-S-a>', '<C-^>', {})
vim.keymap.set('n', '<M-S-b>', '<C-^>', {})
vim.keymap.set('i', '<M-S-b>', '<C-^>', {})
-- Make a new tab
vim.keymap.set('n', '<M-S-y>', ":tabe<cr>", { desc = 'New Tab Page' })
vim.keymap.set('i', '<M-S-y>', "<ESC>:tabe<cr>", { desc = 'New Tab Page' })
-- vim.keymap.set('n', '<M-S-n>', ":tabe<cr>", { desc = 'New Tab Page' })
-- vim.keymap.set('i', '<M-S-n>', "<ESC>:tabe<cr>", { desc = 'New Tab Page' })
-- vim.keymap.set('n', '<M-S-F6>', ":tabe<cr>", { desc = 'New Tab Page' })
-- vim.keymap.set('i', '<M-S-F6>', "<ESC>:tabe<cr>", { desc = 'New Tab Page' })
-- Previous/Next Tab
vim.keymap.set('n', '<M-S-u>', "gT<cr>", { desc = 'Previous tab' })
vim.keymap.set('i', '<M-S-u>', "<ESC>gT<cr>", { desc = 'Previous tab' })
vim.keymap.set('n', '<M-S-m>', "gT<cr>", { desc = 'Previous tab' })
vim.keymap.set('i', '<M-S-m>', "<ESC>gT<cr>", { desc = 'Previous tab' })
vim.keymap.set('n', '<M-S-i>', "gt<cr>", { desc = 'Previous tab' })
vim.keymap.set('i', '<M-S-i>', "<ESC>gt<cr>", { desc = 'Previous tab' })
-- Save (write) and Close (delete) a buffer
vim.keymap.set('n', '<M-S-w>', ":w<cr>:bd<cr>", { desc = 'Close (delete) buffer' })
vim.keymap.set('i', '<M-S-w>', "<ESC>:w<cr>:bd<cr>", { desc = 'Close (delete) buffer' })
-- Save and close a tab quit
vim.keymap.set('n', '<M-S-q>', ":wa<cr>:bd<cr>", { desc = 'Close (delete) buffer' })
vim.keymap.set('i', '<M-S-q>', "<ESC>:wa<cr>:bd<cr>", { desc = 'Close (delete) buffer' })
-- Set loaded_matchparen here to `1` to disable
-- parenthesis highlighting. This was originaly
-- lower in the file, but it didn't work down
-- there for some reason I haven't looked into
vim.g.loaded_matchparen = 0
-- vim.keymap.set('n', '<C-s>', ':wa<cr>', {})
-- vim.keymap.set('n', '<C-A-w>', ':wa<cr> :bd<cr>', {})
-- vim.keymap.set('n', '<C-r>', ':wa<cr>:luafile %<cr>', {})
-- Install package manager
-- https://github.com/folke/lazy.nvim
-- `:help lazy.nvim.txt` for more info
local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
if not vim.loop.fs_stat(lazypath) then
vim.fn.system {
'git',
'clone',
'--filter=blob:none',
'https://github.com/folke/lazy.nvim.git',
'--branch=stable',
lazypath,
}
end
vim.opt.rtp:prepend(lazypath)
-- NOTE: Here is where you install your plugins.
-- You can configure plugins using the `config` key.
--
-- You can also configure plugins after the setup call,
-- as they will be available in your neovim runtime.
--
require('lazy').setup({
-- Grimoire Test
{ dir = "~/workshop/nvim-grimoire" },
-- Git related plugins
'tpope/vim-fugitive',
'tpope/vim-rhubarb',
-- Detect tabstop and shiftwidth automatically
'tpope/vim-sleuth',
-- Treesitter Playground
'nvim-treesitter/playground',
-- null-ls for trying to get a python language
-- server to work
{ 'jose-elias-alvarez/null-ls.nvim' },
-- tmux-vim-cross navigation
'christoomey/vim-tmux-navigator',
-- rust-tools to ride on top of rust_analyzer
{ 'simrat39/rust-tools.nvim',},
-- Prettier
--
-- Trying this jinja plugin
-- REMOVED: it highlights, but it causes
-- a bunch of "Can not source directory" errors
-- { 'lepture/vim-jinja' },
-- TODO: Look at the html-django tree-sitter
-- NOTE: This is where your plugins related to LSP can be installed.
-- The configuration is done below. Search for lspconfig to find it below.
{
-- LSP Configuration & Plugins
'neovim/nvim-lspconfig',
dependencies = {
-- Automatically install LSPs to stdpath for neovim
'williamboman/mason.nvim',
'williamboman/mason-lspconfig.nvim',
-- Useful status updates for LSP
-- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
-- { 'j-hui/fidget.nvim', opts = {} },
-- Additional lua configuration, makes nvim stuff amazing!
'folke/neodev.nvim',
},
},
{
-- Autocompletion
'hrsh7th/nvim-cmp',
dependencies = { 'hrsh7th/cmp-nvim-lsp', 'L3MON4D3/LuaSnip', 'saadparwaiz1/cmp_luasnip' },
},
-- -- Useful plugin to show you pending keybinds.
-- { 'folke/which-key.nvim', opts = {} },
-- { -- Adds git releated signs to the gutter, as well as utilities for managing changes
-- 'lewis6991/gitsigns.nvim',
-- opts = {
-- -- See `:help gitsigns.txt`
-- signs = {
-- add = { text = '+' },
-- change = { text = '~' },
-- delete = { text = '_' },
-- topdelete = { text = '‾' },
-- changedelete = { text = '~' },
-- },
-- },
-- },
{
'bluz71/vim-moonfly-colors',
priority = 1000,
config = function()
vim.cmd.colorscheme 'moonfly'
end,
},
-- {
-- 'bluz71/vim-nightfly-colors',
-- priority = 1000,
-- config = function()
-- vim.cmd.colorscheme 'nightfly'
-- end,
-- },
{
-- Set lualine as statusline
'nvim-lualine/lualine.nvim',
-- See `:help lualine.txt`
opts = {
options = {
icons_enabled = false,
theme = 'moonfly',
component_separators = '|',
section_separators = '',
},
},
},
-- {
-- -- Theme inspired by Atom
-- 'navarasu/onedark.nvim',
-- priority = 1000,
-- config = function()
-- vim.cmd.colorscheme 'onedark'
-- end,
-- },
-- {
-- -- Set lualine as statusline
-- 'nvim-lualine/lualine.nvim',
-- -- See `:help lualine.txt`
-- opts = {
-- options = {
-- icons_enabled = false,
-- theme = 'onedark',
-- component_separators = '|',
-- section_separators = '',
-- },
-- },
-- },
-- { -- Add indentation guides even on blank lines
-- 'lukas-reineke/indent-blankline.nvim',
-- -- Enable `lukas-reineke/indent-blankline.nvim`
-- -- See `:help indent_blankline.txt`
-- opts = {
-- char = '┊',
-- show_trailing_blankline_indent = false,
-- },
-- },
-- "gc" to comment visual regions/lines
-- { 'numToStr/Comment.nvim', opts = {} },
{ 'tpope/vim-commentary' },
-- Fuzzy Finder (files, lsp, etc)
{ 'nvim-telescope/telescope.nvim', version = '*', dependencies = { 'nvim-lua/plenary.nvim' } },
-- Fuzzy Finder Algorithm which requires local dependencies to be built.
-- Only load if `make` is available. Make sure you have the system
-- requirements installed.
{
'nvim-telescope/telescope-fzf-native.nvim',
-- NOTE: If you are having trouble with this installation,
-- refer to the README for telescope-fzf-native for more instructions.
build = 'make',
cond = function()
return vim.fn.executable 'make' == 1
end,
},
{
'nvim-treesitter/nvim-treesitter',
dependencies = {
'nvim-treesitter/nvim-treesitter-textobjects',
},
config = function()
pcall(require('nvim-treesitter.install').update { with_sync = true })
end,
},
-- For displaying messages from Lua scripts
'rcarriga/nvim-notify',
-- NOTE: Next Step on Your Neovim Journey: Add/Configure additional "plugins" for kickstart
-- These are some example plugins that I've included in the kickstart repository.
-- Uncomment any of the lines below to enable them.
require 'kickstart.plugins.autoformat',
-- require 'kickstart.plugins.debug',
-- NOTE: The import below automatically adds your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
-- You can use this folder to prevent any conflicts with this init.lua if you're interested in keeping
-- up-to-date with whatever is in the kickstart repo.
--
-- For additional information see: https://github.com/folke/lazy.nvim#-structuring-your-plugins
--
-- An additional note is that if you only copied in the `init.lua`, you can just comment this line
-- to get rid of the warning telling you that there are not plugins in `lua/custom/plugins/`.
-- { import = 'custom.plugins' },
}, {})
-- [[ Setting options ]]
-- See `:help vim.o`
-- Various config stuff
vim.o.wrap = false
vim.o.scrolloff = 3
vim.o.shell = "/bin/zsh"
vim.o.tabstop = 2
vim.o.shiftwidth = 2
vim.o.expandtab = true
vim.o.softtabstop = 2
vim.o.smarttab = true
vim.o.spell = true
vim.o.autowrite = true
vim.o.autoread = true
-- set autoindent
-- set smartindent
-- set shiftround
-- Set highlight on search
vim.o.hlsearch = false
-- Make line numbers default
vim.wo.number = true
vim.wo.rnu = true
-- Enable mouse mode
-- -- -- -- -- -- -- -- vim.o.mouse = 'a'
-- Sync clipboard between OS and Neovim.
-- Remove this option if you want your OS clipboard to remain independent.
-- See `:help 'clipboard'`
vim.o.clipboard = 'unnamedplus'
-- Enable break indent
vim.o.breakindent = true
-- Save undo history
-- vim.o.undofile = true -- turned off becuase it freams me out
-- Case insensitive searching UNLESS /C or capital in search
vim.o.ignorecase = true
vim.o.smartcase = true
-- Keep signcolumn on by default
vim.wo.signcolumn = 'yes'
-- Decrease update time
vim.o.updatetime = 50
vim.o.timeout = true
vim.o.timeoutlen = 1000
-- Set completeopt to have a better completion experience
vim.o.completeopt = 'menuone,noselect'
-- NOTE: You should make sure your terminal supports this
vim.o.termguicolors = true
-- Highlight the currnet line
-- vim.o.cursorline = true
-- vim.o.culopt = 'line'
-- Let left arrow go to previous line. The "b" and "s"
-- are defaults. The "[" is what provides the functionality
vim.o.whichwrap="b,s,["
-- Attempt turning filetype on
-- vim.o.filetype="on"
-- [[ Basic keymaps ]]
-- Keymaps for better default experience
-- See `:help vim.keymap.set()`
vim.keymap.set({ 'n', 'v' }, '<Space>', '<Nop>', { silent = true })
-- Remap for dealing with word wrap
vim.keymap.set('n', 'k', "v:count == 0 ? 'gk' : 'k'", { expr = true, silent = true })
vim.keymap.set('n', 'j', "v:count == 0 ? 'gj' : 'j'", { expr = true, silent = true })
-- [[ Highlight on yank ]]
-- See `:help vim.highlight.on_yank()`
local highlight_group = vim.api.nvim_create_augroup('YankHighlight', { clear = true })
vim.api.nvim_create_autocmd('TextYankPost', {
callback = function()
vim.highlight.on_yank()
end,
group = highlight_group,
pattern = '*',
})
-- [[ Configure Telescope ]]
-- See `:help telescope` and `:help telescope.setup()`
require('telescope').setup {
defaults = {
sorting_strategy = "ascending",
initial_mode = 'insert',
mappings = {
i = {
['<C-u>'] = false,
['<C-d>'] = false,
},
},
layout_strategy = 'vertical',
layout_config = { height = 0.96, width = 0.96 },
},
}
-- Enable telescope fzf native, if installed
pcall(require('telescope').load_extension, 'fzf')
-- Load the grimoire
pcall(require('telescope').load_extension, 'grimoire')
-- Grimiore
vim.keymap.set('n', '<M-S-F11>', ":Telescope grimoire<cr>", { desc = 'Grimoire' })
vim.keymap.set('i', '<M-S-F11>', "<ESC>:Telescope grimoire<cr>", { desc = 'Grimoire' })
vim.keymap.set('n', '<M-S-g>', ":Telescope grimoire<cr>", { desc = 'Grimoire' })
vim.keymap.set('i', '<M-S-g>', "<ESC>:Telescope grimoire<cr>", { desc = 'Grimoire' })
-- Help
vim.keymap.set('n', '<M-S-t>', function()
require('telescope.builtin').help_tags({
initial_mode = 'insert'
})
end, { desc = 'Search Help' })
vim.keymap.set('i', '<M-S-t>', function()
require('telescope.builtin').help_tags({
initial_mode = 'insert'
})
end, { desc = 'Search Help' })
-- Recent files
vim.keymap.set('n', '<M-S-d>', function()
require('telescope.builtin').oldfiles({
initial_mode = 'insert'
})
end, { desc = 'Telescope: Recent files' })
vim.keymap.set('i', '<M-S-d>', function()
require('telescope.builtin').oldfiles({
initial_mode = 'insert'
})
end, { desc = 'Telescope: Recent files' })
-- File search
vim.keymap.set('n', '<M-S-r>', function()
require('telescope.builtin').find_files({
initial_mode = 'insert'
})
end, { desc = 'File search' })
vim.keymap.set('i', '<M-S-r>', function()
require('telescope.builtin').find_files({
initial_mode = 'insert'
})
end, { desc = 'File search' })
-- -- Currently open files
-- vim.keymap.set('n', '<M-S-f>', function()
-- require('telescope.builtin').buffers(
-- { initial_mode = 'normal' }
-- )
-- end, { desc = 'Telescope: Current buffers' })
-- vim.keymap.set('i', '<M-S-f>', function()
-- require('telescope.builtin').buffers(
-- { initial_mode = 'normal' }
-- )
-- end, { desc = 'Telescope: Current buffers' })
-- -- Search current buffer
-- vim.keymap.set('n', '<A-m>', function()
-- require('telescope.builtin').current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
-- winblend = 10,
-- previewer = false,
-- })
-- end, { desc = 'Fuzzily search in current buffer' })
-- Live grep
--vim.keymap.set('n', '<M-S-e>', function()
-- require('telescope.builtin').live_grep()
-- end, { desc = 'Grep search' })
-- vim.keymap.set('i', '<M-S-e>', function()
-- require('telescope.builtin').live_grep()
-- end, { desc = 'Grep search' })
-- Stuff to look at
-- vim.keymap.set('n', '<leader>sw', require('telescope.builtin').grep_string, { desc = '[S]earch current [W]ord' })
-- vim.keymap.set('n', '<leader>sd', require('telescope.builtin').diagnostics, { desc = '[S]earch [D]iagnostics' })
-- [[ Configure Treesitter ]]
-- See `:help nvim-treesitter`
require('nvim-treesitter.configs').setup {
-- Add languages to be installed here that you want installed for treesitter
ensure_installed = { 'c', 'cpp', 'go', 'html', 'lua', 'python', 'rust', 'tsx', 'typescript', 'help', 'vim', 'javascript' },
-- Autoinstall languages that are not installed
auto_install = true,
highlight = {
enable = true,
additional_vim_regex_highlighting = false,
},
indent = { enable = true, disable = { 'python', 'lua' } },
incremental_selection = {
enable = true,
keymaps = {
init_selection = '<c-space>',
node_incremental = '<c-space>',
scope_incremental = '<c-s>',
node_decremental = '<M-space>',
},
},
textobjects = {
select = {
enable = true,
lookahead = true, -- Automatically jump forward to textobj, similar to targets.vim
keymaps = {
-- You can use the capture groups defined in textobjects.scm
['aa'] = '@parameter.outer',
['ia'] = '@parameter.inner',
['af'] = '@function.outer',
['if'] = '@function.inner',
['ac'] = '@class.outer',
['ic'] = '@class.inner',
},
},
move = {
enable = true,
set_jumps = true, -- whether to set jumps in the jumplist
goto_next_start = {
-- ['{'] = '@function.outer',
-- [']]'] = '@class.outer',
},
-- goto_next_end = {
-- [']M'] = '@function.outer',
-- [']['] = '@class.outer',
-- },
goto_previous_start = {
-- ['}'] = '@function.outer',
--['[['] = '@class.outer',
},
-- goto_previous_end = {
-- ['[M'] = '@function.outer',
-- ['[]'] = '@class.outer',
-- },
},
swap = {
-- Look more into this
enable = false,
swap_next = {
['<leader>a'] = '@parameter.inner',
},
swap_previous = {
['<leader>A'] = '@parameter.inner',
},
},
},
}
-- Add Neopolitan Tree-sitter Parser/Highlighter
local parser_config = require "nvim-treesitter.parsers".get_parser_configs()
parser_config.neopolitan = {
install_info = {
url = "~/workshop/tree-sitter-neopolitan",
files = {"src/parser.c", "src/scanner.cc"},
generate_requires_npm = false,
requires_generate_from_grammar = false,
},
}
-- Add the neo file type for .neo files
vim.filetype.add({
extension = {
neo = 'neopolitan',
}
})
-- Use Neopolitan to highlight .neo and .org files
vim.treesitter.language.register('neopolitan', 'org')
-- set neopolitan syntax highlight colors
vim.api.nvim_set_hl(0, "@neo_attr_bool", { link="@neo_attr_key" })
vim.api.nvim_set_hl(0, "@neo_attr_dashes", { link = "@neo_section_dashes" })
vim.api.nvim_set_hl(0, "@neo_attr_key", { link = "@neo_section_token" })
vim.api.nvim_set_hl(0, "@neo_attr_separator", { link="@neo_attr_key" })
vim.api.nvim_set_hl(0, "@neo_attr_value", { link="@neo_attr_key" })
vim.api.nvim_set_hl(0, "@neo_container_token", { link="@neo_attr_key" })
vim.api.nvim_set_hl(0, "@neo_checkbox_bracket", { fg = "#81d8db" })
vim.api.nvim_set_hl(0, "@neo_checkbox_checkmark", { fg = "#0a7d1d" })
vim.api.nvim_set_hl(0, "@neo_checkbox_in_progress", { fg = "#869ea3" })
vim.api.nvim_set_hl(0, "@neo_list_dash", { fg = "#eeeeee" })
vim.api.nvim_set_hl(0, "@neo_paragraph_first_word", { link = "@neo_section_token" })
vim.api.nvim_set_hl(0, "@neo_paragraph_nth_word", { link = "@neo_section_token" })
vim.api.nvim_set_hl(0, "@neo_section_dashes", { fg = "#656565", bold = false })
vim.api.nvim_set_hl(0, "@neo_section_token", { fg = "#eeeeee", bold = false })
-- vim.api.nvim_set_hl(0, "@neo_nb_whitespace", { fg = black })
-- Diagnostic keymaps
-- vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = "Go to previous diagnostic message" })
-- vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = "Go to next diagnostic message" })
vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = "Open floating diagnostic message" })
vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = "Open diagnostics list" })
-- LSP settings.
-- This function gets run when an LSP connects to a particular buffer.
local on_attach = function(_, bufnr)
-- NOTE: Remember that lua is a real programming language, and as such it is possible
-- to define small helper and utility functions so you don't have to repeat yourself
-- many times.
--
-- In this case, we create a function that lets us more easily define mappings specific
-- for LSP related items. It sets the mode, buffer and description for us each time.
local nmap = function(keys, func, desc)
if desc then
desc = 'LSP: ' .. desc
end
vim.keymap.set('n', keys, func, { buffer = bufnr, desc = desc })
end
nmap('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
nmap('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
nmap('gd', vim.lsp.buf.definition, '[G]oto [D]efinition')
nmap('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
nmap('gI', vim.lsp.buf.implementation, '[G]oto [I]mplementation')
nmap('<leader>D', vim.lsp.buf.type_definition, 'Type [D]efinition')
nmap('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
nmap('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
-- See `:help K` for why this keymap
nmap('K', vim.lsp.buf.hover, 'Hover Documentation')
nmap('<C-k>', vim.lsp.buf.signature_help, 'Signature Documentation')
-- Lesser used LSP functionality
nmap('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
-- nmap('<leader>wa', vim.lsp.buf.add_workspace_folder, '[W]orkspace [A]dd Folder')
-- nmap('<leader>wr', vim.lsp.buf.remove_workspace_folder, '[W]orkspace [R]emove Folder')
-- nmap('<leader>wl', function()
-- print(vim.inspect(vim.lsp.buf.list_workspace_folders()))
-- end, '[W]orkspace [L]ist Folders')
-- Create a command `:Format` local to the LSP buffer
vim.api.nvim_buf_create_user_command(bufnr, 'Format', function(_)
vim.lsp.buf.format()
end, { desc = 'Format current buffer with LSP' })
end
-- Enable the following language servers
-- Feel free to add/remove any LSPs that you want here. They will automatically be installed.
--
-- Add any additional override configuration in the following tables. They will be passed to
-- the `settings` field of the server config. You must look up that documentation yourself.
local servers = {
clangd = {},
-- gopls = {},
pyright = {},
rust_analyzer = {},
-- tsserver = {},
lua_ls = {
Lua = {
workspace = { checkThirdParty = false },
telemetry = { enable = false },
},
},
}
-- Setup neovim lua configuration
require('neodev').setup()
-- nvim-cmp supports additional completion capabilities, so broadcast that to servers
local capabilities = vim.lsp.protocol.make_client_capabilities()
capabilities = require('cmp_nvim_lsp').default_capabilities(capabilities)
-- Setup mason so it can manage external tooling
require('mason').setup()
-- Ensure the servers above are installed
local mason_lspconfig = require 'mason-lspconfig'
mason_lspconfig.setup {
ensure_installed = vim.tbl_keys(servers),
}
mason_lspconfig.setup_handlers {
function(server_name)
require('lspconfig')[server_name].setup {
capabilities = capabilities,
on_attach = on_attach,
settings = servers[server_name],
}
end,
}
-- nvim-cmp setup
local cmp = require 'cmp'
local luasnip = require 'luasnip'
luasnip.config.setup {}
cmp.setup {
snippet = {
expand = function(args)
luasnip.lsp_expand(args.body)
end,
},
mapping = cmp.mapping.preset.insert {
['<C-d>'] = cmp.mapping.scroll_docs(-4),
['<C-f>'] = cmp.mapping.scroll_docs(4),
['<C-Space>'] = cmp.mapping.complete {},
['<CR>'] = cmp.mapping.confirm {
behavior = cmp.ConfirmBehavior.Replace,
select = true,
},
['<Tab>'] = cmp.mapping(function(fallback)
if cmp.visible() then
cmp.select_next_item()
elseif luasnip.expand_or_jumpable() then
luasnip.expand_or_jump()
else
fallback()
end
end, { 'i', 's' }),
['<S-Tab>'] = cmp.mapping(function(fallback)
if cmp.visible() then
cmp.select_prev_item()
elseif luasnip.jumpable(-1) then
luasnip.jump(-1)
else
fallback()
end
end, { 'i', 's' }),
},
sources = {
{ name = 'nvim_lsp' },
{ name = 'luasnip' },
},
}
-- Trying to get something to work for
-- python formatting
local null_ls = require("null-ls")
null_ls.setup({
sources = {
null_ls.builtins.formatting.autopep8
-- check these out for working with
-- minijinja files. via:
-- https://github.com/jose-elias-alvarez/null-ls.nvim/blob/main/doc/BUILTINS.md
-- null_ls.builtins.diagnostics.djlint,
-- null_ls.builtins.formatting.djhtml,
},
})
-- This is for testing the neopolitan LSP on .tmp files
-- vim.api.nvim_create_autocmd("BufReadPost", {
-- pattern = "*.tmp",
-- group = vim.api.nvim_create_augroup("LSPTestGroup", { clear = true }),
-- callback = function()
-- vim.lsp.start({
-- name = 'neopolitan',
-- cmd = {'/Users/alan/workshop/neopolitan-lsp/target/debug/nrs-language-server'},
-- root_dir = vim.fs.dirname(vim.fs.find({'Cargo.toml'}, { upward = true })[1]),
-- })
-- end,
-- })
-- This was an attempt to restart and LSP whenever returning
-- to a *.tmp file but it didn't work. Leaving here as
-- a work in progress
--
-- vim.api.nvim_create_autocmd("BufEnter", {
-- pattern = "*.tmp",
-- group = vim.api.nvim_create_augroup("LSPTestRestartGroup", { clear = true }),
-- callback = function()
-- print("restarting lsp")
-- vim.lsp.stop_client(vim.lsp.get_active_clients())
-- vim.lsp.start({
-- name = 'neopolitan',
-- cmd = {'/Users/alan/workshop/neopolitan-lsp/target/debug/nrs-language-server'},
-- root_dir = vim.fs.dirname(vim.fs.find({'Cargo.toml'}, { upward = true })[1]),
-- })
-- end,
-- })
-- vim.lsp.start({
-- autostart = true,
--name = 'neopolitan',
-- cmd = {'/Users/alan/workshop/neopolitan-lsp/target/debug/nrs-language-server'},
-- root_dir = vim.fs.dirname(vim.fs.find({'Cargo.toml'}, { upward = true })[1]),
-- filetype = {'org'},
-- })
-- this causes slow downs but is useful
-- when working on lsp
-- vim.lsp.set_log_level('debug')
-- The line beneath this is called `modeline`. See `:help modeline`
-- vim: ts=2 sts=2 sw=2 et
vim.cmd.highlight({ "Normal", "guibg=NONE" })
vim.cmd.highlight({ "Normal", "ctermbg=NONE" })